Five Star Windows, Inc

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

• Review design plans to minimize the number of cuts and waste of wallboard
• Measure the location of electrical outlets, plumbing, windows, and vents
• Cut drywall to the right size, using utility knives and power saws
• Fasten drywall panels to interior wall studs, using nails or screws
• Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

• Measure according to blueprints or drawings
• Nail or screw supports
• Put tiles or sheets of shock-absorbing materials on ceilings  
• Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

• Prepare wall surface (wallboard) by patching nail holes
• Apply tape and use sealing compound to cover joints between wallboards
• Apply additional coats of sealing compound to create an even surface
• Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.

Construction and building inspectors ensure that new construction, changes, or repairs comply with local and national building codes and ordinances, zoning regulations, and contract specifications.

Construction and building inspectors typically do the following:

• Review and approve plans that meet building codes, local ordinances, and zoning regulations
• Inspect and monitor construction sites to ensure overall compliance
• Use survey instruments, metering devices, and test equipment to perform inspections
• Monitor installation of plumbing, electrical, and other systems to ensure that the building meets codes
• Verify level, alignment, and elevation of structures and fixtures to ensure building compliance
• Issue violation notices and stop-work orders until building is compliant
• Keep daily logs, including photographs taken during inspection

Construction and building inspectors examine buildings, highways and streets, sewer and water systems, dams, bridges, and other structures. They also inspect electrical; heating, ventilation, air-conditioning, and refrigeration (HVACR); and plumbing systems. Although no two inspections are alike, inspectors do an initial check during the first phase of construction and follow-up inspections throughout the construction project. When the project is finished, they do a final, comprehensive inspection.

The following are types of construction and building inspectors:

Building inspectors check the structural quality and general safety of buildings. Some specialize in structural steel or reinforced-concrete structures, for example.

Electrical inspectors examine the installed electrical systems to ensure they function properly and comply with electrical codes and standards. The inspectors visit worksites to inspect new and existing sound and security systems, wiring, lighting, motors, and generating equipment. They also inspect the installed electrical wiring for HVACR systems and appliances.

Elevator inspectors examine lifting and conveying devices, such as elevators, escalators, moving sidewalks, lifts and hoists, inclined railways, ski lifts, and amusement rides.

Home inspectors typically inspect newly built or previously owned homes, condominiums, townhomes, and other dwellings. Prospective home buyers often hire home inspectors to check and report on a home's structure and overall condition. Sometimes, homeowners hire a home inspector to evaluate their home's condition before placing it on the market.

In addition to examining structural quality, home inspectors examine all home systems and features, including roofing, exterior walls, attached garage or carport, foundation, interior, plumbing, electrical, and HVACR systems. They look for and report violations of building codes, but they do not have the power to enforce compliance with the codes.

Mechanical inspectors examine the installation of HVACR systems and equipment to ensure that they are installed and function properly. They also may inspect commercial kitchen equipment, gas-fired appliances, and boilers.

Plan examiners determine whether the plans for a building or other structure comply with building codes. They also determine whether the structure is suited to the engineering and environmental demands of the building site.

Plumbing inspectors examine the installation of potable water, waste, and vent piping systems to ensure the safety and health of the drinking water system, piping for industrial uses, and the sanitary disposal of waste.

Public works inspectors ensure that federal, state, and local government water and sewer systems, highways, streets, bridges, and dam construction conform to detailed contract specifications. Workers inspect excavation and fill operations, the placement of forms for concrete, concrete mixing and pouring, asphalt paving, and grading operations. Public works inspectors may specialize in highways, structural steel, reinforced concrete, or ditches. Others specialize in dredging operations required for bridges and dams or for harbors.

Specification inspectors ensure that work is performed according to design specifications. Specification inspectors represent the owner's interests, not those of the general public. Insurance companies and financial institutions also may use their services.

A primary concern of building inspectors is fire prevention safety. For more information, see the profile on fire inspectors and investigators.

Fire inspectors visit and inspect buildings and other structures, such as sports arenas and shopping malls, to search for fire hazards and to ensure that federal, state, and local fire codes are met. They also test and inspect fire protection and fire extinguishing equipment to ensure that it works. Fire investigators determine the origin and cause of fires by searching the surrounding scene and collecting evidence.

Fire inspectors typically do the following:

• Search for fire hazards
• Ensure that buildings comply with fire codes
• Test fire alarms, sprinklers, and other fire protection and extinguishing equipment
• Inspect equipment such as gasoline storage tanks and air compressors
• Review emergency evacuation plans
• Conduct follow-up visits when an infraction is found
• Confer with developers and planners to review plans for residential and commercial buildings
• Conduct fire and life safety education programs
• Keep detailed records that can be used in a court of law

Fire investigators typically do the following:

• Collect and analyze evidence
• Interview witnesses
• Determine the origin and cause of a fire
• Process and document evidence, such as photographs and diagrams
• Reconstruct the scene of a fire or arson
• Confer with other specialists, such as chemists, engineers, and attorneys, to analyze information
• Send evidence to laboratories to be tested for fingerprints or an accelerant
• Keep detailed records that can be used in a court of law
• Testify in civil and criminal legal proceedings

Unlike fire inspectors, many fire investigators have police powers and carry a weapon.

Forest fire inspectors and prevention specialists assess fire hazards in both public and residential areas. They look for issues that pose a wildfire risk and recommend ways to reduce the fire hazard. During patrols, they ensure that the public is following fire regulations and report fire conditions to central command.

Construction managers plan, coordinate, budget, and supervise construction projects from early development to completion.

Construction managers typically do the following:

• Prepare and negotiate cost estimates, budgets, and work timetables
• Select appropriate construction methods and strategies
• Interpret and explain contracts and technical information to workers and other professionals
• Report on work progress and budget matters to clients
• Collaborate with architects, engineers, and other construction and building specialists
• Instruct and supervise construction personnel and activities onsite
• Respond to work delays and other problems and emergencies
• Select, hire, and instruct laborers and subcontractors  
• Comply with legal requirements, building and safety codes, and other regulations

Construction managers, often called general contractors or project managers, coordinate and supervise a wide variety of projects, including the building of all types of residential, commercial, and industrial structures, roads, bridges, powerplants, schools, and hospitals. They oversee specialized contractors and other personnel. Construction managers schedule and coordinate all design and construction processes to ensure a productive and safe work environment. They also make sure jobs are completed on time and on budget with the right amount of tools, equipment, and materials. Many managers also are responsible for obtaining necessary permits and licenses. They are often responsible for multiple projects at a time.

Construction managers work closely with other building specialists, such as architects, engineers, and a variety of trade workers, such as stonemasons, electricians, and carpenters. Projects may require specialists in everything from structural metalworking and painting, to landscaping, building roads, installing carpets, and excavating sites. Depending on the project, construction managers also may interact with lawyers and local government officials. For example, when working on city-owned property or municipal buildings, managers sometimes confer with city council members to ensure that all regulations are met.

For projects too large to be managed by one person, such as office buildings and industrial complexes, a construction manager would only be in charge of one part of the project. Each construction manager would oversee a specific construction phase and choose subcontractors to complete it. Construction managers may need to collaborate and coordinate with other construction managers who are responsible for different aspects of the project.

To maximize efficiency and productivity, construction managers often use specialized cost-estimating and planning software to effectively budget the time and money required to complete specific projects. Many managers also use software to determine the best way to get materials to the building site. For more information, see the profile on cost estimators.

Glaziers install glass in windows, skylights, storefronts, and display cases to create distinctive designs or reduce the need for artificial lighting.

Glaziers typically do the following:

• Follow blueprints or specifications for size, color, type, and thickness of glass to be used
• Remove any old or broken glass before installing replacement glass
• Cut glass to the specified size and shape
• Make or install sashes or moldings for glass installation
• Fasten glass into sashes or frames with clips, moldings, or other types of fasteners
• Add weather seal or putty around pane edges to seal joints

Glass has many uses in modern life. For example, insulated and specially treated glass keeps in warm or cool air and controls sound and condensation. Tempered and laminated glass makes doors and windows more secure. The creative use of large windows, glass doors, skylights, and sunroom additions makes buildings bright, airy, and inviting. Glaziers specialize in installing these different glass products.

In homes, glaziers install or replace windows, mirrors, shower doors, and bathtub enclosures. They fit glass for tabletops and display cases. On commercial interior projects, glaziers install items such as heavy, often etched, decorative room dividers or security windows. Glazing projects also may involve replacing storefront windows for supermarkets, auto dealerships, banks, and so on.

Workers who replace and repair glass in motor vehicles are not covered in this profile. For more information, see the profile on automotive body and glass repairers.  

For most large scale construction jobs, glass is precut and mounted into frames at a factory or a contractor's shop. The finished glass arrives at the jobsite ready for glaziers to position and secure into place. Using cranes or hoists with suction cups, workers lift large, heavy pieces of glass for installation. In cases where the glass is not secure inside the frame, glaziers may attach steel and aluminum sashes or frames to the building, and then secure the glass with clips, moldings, or other types of fasteners. 

A few glaziers work with plastics, granite, marble, and other materials used as glass substitutes.  Some work with films or laminates that improve the durability or safety of the glass.