Garage Door & Gates Valencia

Mechanical Door Repairers install, service, or repair automatic door mechanisms and hydraulic doors. Includes garage door mechanics.

Parts Salespersons sell spare and replacement parts and equipment in repair shop or parts store.

Carpenters construct and repair building frameworks and structures--such as stairways, doorframes, partitions, and rafters--made from wood and other materials. They also may install kitchen cabinets, siding, and drywall.

Carpenters typically do the following:

• Follow blueprints and building plans to meet the needs of clients
• Install structures and fixtures, such as windows and molding
• Measure, cut, or shape wood, plastic, fiberglass, drywall, and other materials
• Construct building frameworks, including wall studs, floor joists, and doorframes
• Help put up, level, and install building framework with the aid of large pulleys and cranes
• Inspect and replace damaged framework or other structures and fixtures
• Instruct and direct laborers and other construction trade helpers

Carpenters are one of the most versatile construction occupations, with workers usually doing a variety of tasks. For example, some carpenters insulate office buildings; others install drywall or kitchen cabinets in homes. Those who help construct large buildings or bridges often make the wooden concrete forms for cement footings or pillars. Some carpenters build braces and scaffolding for buildings.

Carpenters use many different hand and power tools to cut and shape wood, plastic, fiberglass, or drywall. They commonly use handtools, including squares, levels, and chisels, as well as many power tools, such as sanders, circular saws, and nail guns. Carpenters put materials together with nails, screws, staples, and adhesives, and do a final check of their work to ensure accuracy. They use a tape measure on every project because proper measuring increases productivity, reduces waste, and ensures that the pieces being cut are the proper size.

The following are types of carpenters:

Residential carpenters typically specialize in new-home, townhome, and condominium building and remodeling. As part of a single job, they might build and set forms for footings, walls and slabs, and frame and finish exterior walls, roofs, and decks. They frame interior walls, build stairs, and install drywall, crown molding, doors, and kitchen cabinets. Highly-skilled carpenters may also tile floors and lay wood floors and carpet. Fully-trained construction carpenters are easily able to switch from new-home building to remodeling.

Commercial carpenters typically remodel and help build commercial office buildings, hospitals, hotels, schools, and shopping malls. Some specialize in working with light gauge and load-bearing steel framing for interior partitions, exterior framing, and curtain wall construction. Others specialize in working with concrete forming systems and finishing interior and exterior walls, partitions, and ceilings. Highly skilled carpenters can usually do many of the same tasks as residential carpenters.

Industrial carpenters typically work in civil and industrial settings where they put up scaffolding and build and set forms for pouring concrete. Some industrial carpenters build tunnel bracing or partitions in underground passageways and mines to control the circulation of air to worksites. Others build concrete forms for tunnels, bridges, dams, power plants, or sewer construction projects.

Automotive service technicians and mechanics, often called service technicians or service techs, inspect, maintain, and repair cars and light trucks.  

Automotive service technicians and mechanics typically do the following:

• Test parts and systems to ensure that they are working properly
• Identify mechanical problems, often by using computerized diagnostic equipment
• Follow checklists to ensure that all critical parts are examined
• Test and lubricate the vehicle's engine and other major components
• Perform basic care and maintenance, including oil changes, tuneups, and tire rotations
• Repair or replace worn parts, such as brake pads and wheel bearings
• Disassemble and reassemble parts
• Use testing equipment to ensure that repairs and maintenance are effective
• Explain to clients their automotive problems and the repairs done on their vehicles

Service technicians work on traditional mechanical components, such as engines, transmissions, belts, and hoses. However, they must also be familiar with a growing number of electronic systems. Braking, transmission, and steering systems, for example, are controlled primarily by computers and electronic components.

Other integrated electronic systems, such as accident-avoidance sensors, are becoming common as well. In addition, a growing number of technicians are required to work on vehicles that run on alternative fuels, such as ethanol and electricity.

Service technicians use many different tools, including computerized diagnostic tools and power tools such as pneumatic wrenches, lathes, welding torches, and jacks and hoists. These tools usually are owned by their employers.

Service technicians also use many common handtools, such as pliers, wrenches, and screwdrivers, which generally are their own. In fact, experienced workers often have thousands of dollars invested in their personal tool collection.

Service technicians sometimes specialize in a particular type of repair that may be subject to specific regulations or procedures. For instance, those focused on air-conditioning system repairs must follow federal and state regulations governing the handling, recycling, and disposal of refrigerants.

In some shops, technicians may specialize. The following are types of service technicians:

Automotive air-conditioning repairers install and repair air conditioners and service parts, such as compressors, condensers, and controls. They are trained in government regulations related to their work.

Brake repairers adjust brakes, replace brake linings and pads, and make other repairs on brake systems. Some technicians specialize in both brake and front-end work. 

Front-end mechanics align and balance wheels and repair steering mechanisms and suspension systems. They frequently use special alignment equipment and wheel-balancing machines.

Transmission technicians and rebuilders work on gear trains, couplings, hydraulic pumps, and other parts of transmissions. Extensive knowledge of computer controls, the ability to diagnose electrical and hydraulic problems, and other specialized skills are needed to work on these complex components.

Tune-up technicians adjust ignition timing and valves and adjust or replace spark plugs and other parts to ensure efficient engine performance. They often use electronic testing equipment to isolate and adjust malfunctions in fuel, ignition, and emissions control systems.

For information about technicians who work on large trucks and buses, see the profile on diesel service technicians and mechanics.

For information about technicians who work on farm equipment, construction vehicles, and rail cars, see the profile on heavy vehicle and mobile equipment service technicians.

For information about technicians who repair and service motorcycles, motorboats, and small all-terrain vehicles, see the profile on small engine mechanics.

Heavy vehicle and mobile equipment service technicians inspect, maintain, and repair vehicles and machinery used in construction, farming, rail transportation, and other industries.

Heavy vehicle and mobile equipment service technicians typically do the following:

• Read and understand operating manuals, blueprints, and drawings
• Perform scheduled maintenance, such as cleaning and lubricating parts
• Diagnose and identify malfunctions, using computerized tools and equipment
• Inspect, repair, and replace defective or worn parts, such as bearings, pistons, and gears
• Overhaul and test major components, such as engines, hydraulics, and electrical systems
• Disassemble and reassemble heavy equipment and components
• Travel to worksites to repair large equipment, such as cranes

Heavy vehicles and mobile equipment are critical to many industrial activities, including construction and railroad transportation. Various types of equipment, such as farm machinery, cranes, and bulldozers, are used to move materials, till land, lift beams, and dig earth to pave the way for development and construction.

Heavy vehicle and mobile equipment service technicians repair and maintain engines, hydraulic systems, transmissions, and electrical systems of agricultural, industrial, construction, and rail equipment. They ensure the performance and safety of fuel lines, brakes, transmissions, and other systems.

With many types of equipment and mechanical and electrical systems, service technicians use diagnostic computers to identify problems and make adjustments or repairs. Although the use of computerized testing equipment, such as tachometers and dynamometers, is common, technicians also use many different power and machine tools, including pneumatic wrenches, lathes, and welding equipment.

Service technicians also use many different handtools, such as screwdrivers, pliers, and wrenches, to work on small parts and in hard-to-reach areas. They generally purchase these tools over the course of their careers, often investing thousands of dollars in their collections.

After locating malfunctions, service technicians repair, replace, and recalibrate components such as hydraulic pumps or spark plugs. This may involve disassembling and reassembling major equipment or making adjustments through an onboard computer program.

The following are types of heavy vehicle and mobile equipment service technicians:

Farm equipment mechanics service and repair farm equipment, such as tractors and harvesters. They also work on smaller consumer-grade lawn and garden tractors. Most mechanics work for dealer repair shops, where farmers increasingly send their equipment for maintenance.   

Mobile heavy equipment mechanics repair and maintain construction and surface mining equipment, such as bulldozers, cranes, graders, and excavators. Many work for equipment wholesale and distribution shops and large construction and mining companies. Those working for the federal government may work on tanks and other military equipment.

Rail car repairers specialize in servicing railroad locomotives, subway cars, and other rolling stock. They usually work for railroad, public and private transit companies, and rail car manufacturers.

For information about technicians and mechanics who work primarily on automobiles, see the profile on automotive service technicians and mechanics.

For information about technicians who work primarily on large trucks and buses, see the profile on diesel service technicians and mechanics.

For information about technicians and mechanics who primarily work on motorboats, motorcycles and small all-terrain vehicles, see the profile on small engine mechanics.