Green Convergence Roofing

Construction and building inspectors ensure that new construction, changes, or repairs comply with local and national building codes and ordinances, zoning regulations, and contract specifications.

Construction and building inspectors typically do the following:

• Review and approve plans that meet building codes, local ordinances, and zoning regulations
• Inspect and monitor construction sites to ensure overall compliance
• Use survey instruments, metering devices, and test equipment to perform inspections
• Monitor installation of plumbing, electrical, and other systems to ensure that the building meets codes
• Verify level, alignment, and elevation of structures and fixtures to ensure building compliance
• Issue violation notices and stop-work orders until building is compliant
• Keep daily logs, including photographs taken during inspection

Construction and building inspectors examine buildings, highways and streets, sewer and water systems, dams, bridges, and other structures. They also inspect electrical; heating, ventilation, air-conditioning, and refrigeration (HVACR); and plumbing systems. Although no two inspections are alike, inspectors do an initial check during the first phase of construction and follow-up inspections throughout the construction project. When the project is finished, they do a final, comprehensive inspection.

The following are types of construction and building inspectors:

Building inspectors check the structural quality and general safety of buildings. Some specialize in structural steel or reinforced-concrete structures, for example.

Electrical inspectors examine the installed electrical systems to ensure they function properly and comply with electrical codes and standards. The inspectors visit worksites to inspect new and existing sound and security systems, wiring, lighting, motors, and generating equipment. They also inspect the installed electrical wiring for HVACR systems and appliances.

Elevator inspectors examine lifting and conveying devices, such as elevators, escalators, moving sidewalks, lifts and hoists, inclined railways, ski lifts, and amusement rides.

Home inspectors typically inspect newly built or previously owned homes, condominiums, townhomes, and other dwellings. Prospective home buyers often hire home inspectors to check and report on a home's structure and overall condition. Sometimes, homeowners hire a home inspector to evaluate their home's condition before placing it on the market.

In addition to examining structural quality, home inspectors examine all home systems and features, including roofing, exterior walls, attached garage or carport, foundation, interior, plumbing, electrical, and HVACR systems. They look for and report violations of building codes, but they do not have the power to enforce compliance with the codes.

Mechanical inspectors examine the installation of HVACR systems and equipment to ensure that they are installed and function properly. They also may inspect commercial kitchen equipment, gas-fired appliances, and boilers.

Plan examiners determine whether the plans for a building or other structure comply with building codes. They also determine whether the structure is suited to the engineering and environmental demands of the building site.

Plumbing inspectors examine the installation of potable water, waste, and vent piping systems to ensure the safety and health of the drinking water system, piping for industrial uses, and the sanitary disposal of waste.

Public works inspectors ensure that federal, state, and local government water and sewer systems, highways, streets, bridges, and dam construction conform to detailed contract specifications. Workers inspect excavation and fill operations, the placement of forms for concrete, concrete mixing and pouring, asphalt paving, and grading operations. Public works inspectors may specialize in highways, structural steel, reinforced concrete, or ditches. Others specialize in dredging operations required for bridges and dams or for harbors.

Specification inspectors ensure that work is performed according to design specifications. Specification inspectors represent the owner's interests, not those of the general public. Insurance companies and financial institutions also may use their services.

A primary concern of building inspectors is fire prevention safety. For more information, see the profile on fire inspectors and investigators.

Roofers repair and install the roofs of buildings using a variety of materials, including shingles, asphalt, and metal.

Roofers typically do the following:

• Inspect problem roofs to determine the best way to repair them
• Measure roof to calculate the quantities of materials needed
• Replace damaged or rotting joists or plywood
• Install vapor barriers or layers of insulation
• Install shingles, asphalt, metal, or other materials to make the roof watertight
• Align roofing materials with edges of the roof
• Cut roofing materials to fit angles formed by walls, vents, or intersecting roof surfaces
• Cover exposed nail or screw heads with roofing cement or caulk to prevent leakage

Properly installed roofs keep water from leaking into buildings and damaging the interior, equipment, or furnishings.

There are two basic types of roofs, low-slope and steep-slope:

• Low-slope: About two-thirds of all roofs are low-slope. Most commercial, industrial, and apartment buildings have low-slope roofs. Low-slope roofs rise 4 inches or less per horizontal foot and are installed in layers.
  
  For low-slope roofs, roofers typically use several layers of roofing materials or felt membranes stuck together with hot bitumen (a tar-like substance). They glaze the top layer to make a smooth surface or embed gravel in the hot bitumen to make a rough surface.
  
  An increasing number of low-slope roofs are covered with a single-ply membrane of waterproof rubber or thermoplastic compounds.

• Steep-slope: Most of the remaining roofs are steep-slope. Most single-family houses have steep-slope roofs. Steep-slope roofs rise more than 4 inches per horizontal foot.
  
  For steep-slope roofs, roofers typically use asphalt shingles, which often cost less than other coverings. On steep-slope roofs, some roofers also install tile, solar shingles, fiberglass shingles, metal shingles, or shakes (rough wooden shingles).
  
  To apply shingles, roofers first lay, cut, and tack 3-foot strips of roofing over the entire roof. Then, starting from the bottom edge, they nail overlapping rows of shingles to the roof.

A small but increasing number of buildings now have “green” roofs that incorporate landscape roofing systems. A landscape roofing system typically begins with a single or multiple waterproof layers. After that layer is proven to be leak free, roofers put a root barrier over it, and, finally, layers of soil, in which vegetation is planted. Roofers must ensure that the roof is watertight and can endure the weight and water needs of the plants.

Electrical and electronics installers and repairers install, repair, or replace a variety of electrical equipment in telecommunications, transportation, utilities, and other industries.

Electrical and electronics installers and repairers typically do the following:

• Prepare cost estimates for clients
• Refer to service guides, schematics, and manufacturer specifications
• Repair or replace defective parts, such as motors, fuses, or gaskets
• Reassemble and test equipment after repairs
• Maintain records of parts used, labor time, and final charges

Electrical and electronics installers and repairers work on complex pieces of electronic equipment.

Automated electronic control systems are becoming increasingly complex. As a result, repairers use software programs and testing equipment to diagnose malfunctions. Among their diagnostic tools are multimeters--which measure voltage, current, and resistance--and advanced multimeters, which measure the capacitance, inductance, and current gain of transistors.

Repairers also use signal generators, which provide test signals, and oscilloscopes, which display signals graphically. In addition, repairers use handtools such as pliers, screwdrivers, soldering irons, and wrenches to replace faulty parts and adjust equipment.

Commercial and industrial equipment electrical and electronics repairers repair, test, adjust, or install electronic equipment, such as industrial controls, transmitters, and antennas.

Electrical and electronics installers and repairers of transportation equipment install, adjust, or maintain mobile communication equipment, including sound, sonar, security, navigation, and surveillance systems on trains, watercraft, or other vehicles.

Powerhouse, substation, and relay electrical and electronics repairers inspect, test, maintain, or repair electrical equipment used in generating stations, substations, and inservice relays. These workers may be known as powerhouse electricians, relay technicians, or power transformer repairers.

Electric motor, power tool, and related repairers--such as armature winders, generator mechanics, and electric golf cart repairers--specialize in installing, maintaining, and repairing electric motors, wiring, or switches.

Electronic equipment installers and repairers of motor vehicles install, diagnose, and repair sound, security, and navigation equipment in motor vehicles. Motor vehicle installers and repairers work with an increasingly complex range of electronic equipment, including DVD players, navigation systems, and passive and active security systems.

Electrical and electronic installers and repairers may specialize, according to how and where they work:

Field technicians often travel to factories or other locations to repair equipment. When equipment breaks down, field technicians go to a customer's site to repair the equipment. Because repairing components is a complex activity, workers on the factory floor usually remove and replace defective units, such as circuit boards, instead of fixing them. Defective units are discarded or returned to the manufacturer or a specialized shop for repair.

Bench technicians work in repair shops in factories and service centers, fixing components that cannot be repaired on the factory floor. These workers also locate and repair circuit defects, such as poorly soldered joints, blown fuses, or malfunctioning transistors.

Cost estimators collect and analyze data to estimate the time, money, resources, and labor required for product manufacturing, construction projects, or services. Some specialize in a particular industry or product type.

Cost estimators typically do the following:

• Consult with industry experts to discuss estimates and resolve issues
• Identify and quantify cost factors, such as production time and raw material, equipment, and labor expenses
• Travel to job sites to gather information on materials needed, labor requirements, and other factors 
• Read blueprints and technical documents to prepare estimates
• Collaborate with engineers, architects, owners, and contractors on estimates
• Use sophisticated computer software to calculate estimates 
• Evaluate a product's cost effectiveness or profitability
• Recommend ways to make a product more cost effective or profitable
• Prepare estimates for clients and other business managers
• Develop project plans for the duration of the project

Accurately predicting the cost, size, and duration of future construction and manufacturing projects is vital to the survival of any business. Cost estimators' calculations give managers or investors this information.

When making calculations, estimators analyze many inputs to determine how much time, money, and labor a project needs, or how profitable it will be. These estimates have to take many factors into account, including allowances for wasted material, bad weather, shipping delays, and other factors that can increase costs and lower profitability.

Cost estimators use sophisticated computer software, including database, simulation, and complex mathematical programs. Cost estimators often use a computer database with information on the costs of other similar projects.

General contractors usually hire cost estimators for specific parts of a large construction project, such as estimating the electrical work or the excavation phase. In such cases, the estimator calculates the cost of the construction phase for which the contractor is responsible, rather than calculating the cost of the entire project. The general contractor usually also has a cost estimator who calculates the total project cost by analyzing the bids that the subcontractors' cost estimators prepared.

Some estimators are hired by manufacturers to analyze certain products or processes.

The following are the two primary types of cost estimators:

Construction cost estimators estimate construction work. More than half of all cost estimators work in the construction industry. They may, for example, estimate the total cost of building a bridge or a highway. They may identify direct costs, such as raw materials and labor requirements, and set a timeline for the project. Although many work directly for construction firms, some work for contractors, architects, and engineering firms.

Manufacturing cost estimators calculate the costs of developing, producing, or redesigning a company's goods and services. For example, a cost estimator working for a home appliance manufacturer may determine whether a new type of dishwasher will be profitable to manufacture.

Some manufacturing cost estimators work in software development. Many high-technology products require a considerable amount of computer programming, and the costs of software development are difficult to calculate.  

Two other groups also sometimes do cost estimating in their jobs. Operations research, production control, cost, and price analysts who work for government agencies may do significant amounts of cost estimating in the course of their usual duties. Construction managers also may spend considerable time estimating costs. For more information, see the profiles on operations research analysts and construction managers.

Boilermakers assemble, install, and repair boilers, closed vats, and other large vessels or containers that hold liquids and gases.

Boilermakers typically do the following:

• Use blueprints to determine locations, positions, or dimensions of parts
• Install small premade boilers into buildings and manufacturing facilities
• Lay out prefabricated parts of larger boilers before assembling them
• Assemble boiler tanks, often using robotic or automatic welders
• Test and inspect boiler systems for leaks or defects
• Clean vats using scrapers, wire brushes, and cleaning solvents
• Replace or repair broken valves, pipes, or joints, using hand and power tools, gas torches, and welding equipment

Boilers, tanks, and vats are used in many buildings, factories, and ships. Boilers heat water or other fluids under extreme pressure to generate electric power and to provide heat. Large tanks and vats are used to store and process chemicals, oil, beer, and hundreds of other products.

Boilers are made out of steel, iron, copper, or stainless steel. Manufacturers are increasingly automating the production of boilers to improve the quality of these vessels. However, boilermakers still use many tools in making or repairing boilers. For example, they use hand and power tools or flame cutting torches to cut pieces for a boiler. To bend the pieces into shape and accurately line them up, boilermakers use plumb bobs, levels, wedges, and turnbuckles.

If the plate sections are very large, large cranes lift the parts into place. Once they have the parts lined up, they use metalworking machinery and other tools to remove irregular edges so the parts fit together properly. They join the parts by bolting, welding, or riveting them together.

In addition to installing and maintaining boilers and other vessels, boilermakers help erect and repair air pollution equipment, blast furnaces, water treatment plants, storage and process tanks, and smokestacks. Boilermakers also install refractory brick and other heat-resistant materials in fireboxes or pressure vessels. Some install and maintain the huge pipes used in dams to send water to and from hydroelectric power generation turbines.

Because boilers last a long time--sometimes 50 years or more--boilermakers must regularly maintain them and upgrade parts. They frequently inspect fittings, feed pumps, safety and check valves, water and pressure gauges, and boiler controls.