Harrison Construction

Construction laborers and helpers do many basic tasks that require physical labor on construction sites.

Construction laborers and helpers typically do the following:

• Clean and prepare construction sites by removing debris and possible hazards
• Load or unload building materials to be used in construction
• Build or take apart bracing, barricades, forms (molds that determine the shape of concrete), scaffolding, and temporary structures
• Dig trenches, backfill holes, or compact earth to prepare for construction
• Operate or tend equipment and machines used in construction, such as concrete mixers
• Help other craftworkers with their duties
• Follow construction plans and instructions from the people they are working for

Construction laborers and helpers work on almost all construction sites, doing a wide range of tasks from the very easy to the extremely difficult and hazardous. Although many of the tasks they do require some training and experience, most jobs usually require little skill and can be learned quickly. 

The following are occupational specialties:

Construction laborers do a variety of construction-related activities during all phases of construction. Although most laborers are generalists--such as those who install barricades, cones, and markers to control traffic patterns--many others specialize. For example, those who operate the machines and equipment that lay concrete or asphalt on roads are more likely to specialize in those areas.

Most construction laborers work in the following areas:

• Building homes and businesses
• Tearing down buildings
• Removing hazardous materials
• Building highways and roads
• Digging tunnels and mine shafts

Construction laborers use a variety of tools and equipment. Some tools are simple, such as brooms and shovels; other equipment is more sophisticated, such as pavement breakers, jackhammers, earth tampers, and surveying equipment.

With special training, laborers may help transport and use explosives or run hydraulic boring machines to dig out tunnels. They may learn to use laser beam equipment to place pipes and use computers to control robotic pipe cutters. They may become certified to remove asbestos, lead, or chemicals.

Helpers assist construction craftworkers, such as electricians and carpenters, with a variety of basic tasks. They may carry tools and materials or help set up equipment. For example, many helpers work with cement masons to move and set forms. Many other helpers assist with taking apart equipment, cleaning up sites, and disposing of waste, as well as helping with any other needs of craftworkers.

Many construction trades have helpers who assist craftworkers. The following are examples of trades that have associated helpers:

• Brickmasons, blockmasons, stonemasons, and tile and marble setters
• Carpenters
• Electricians
• Painters, paperhangers, plasterers, and stucco masons
• Pipelayers, plumbers, pipefitters, and steamfitters
• Roofers

Construction equipment operators drive, maneuver, or control the heavy machinery used to construct roads, bridges, buildings, and other structures.

Construction equipment operators typically do the following:

• Check to make sure that equipment functions properly
• Clean, maintain, and make basic repairs to equipment
• Report malfunctions to supervisors
• Move levers, push pedals, or turn valves to activate power equipment
• Drive and maneuver equipment
• Coordinate machine actions with crew members in response to hand or audio signals
• Ensure that safety standards are met

Construction equipment operators use machinery to move construction materials, earth, and other heavy materials at construction sites and mines. They operate equipment that clears and grades land to prepare it for construction of roads, bridges, and buildings, as well as airport runways, power generation facilities, dams, levees, and other structures.

The following are types of construction equipment operators:

Operating engineers and other construction equipment operators work with one or several types of power construction equipment. They may operate excavation and loading machines equipped with scoops, shovels, or buckets that dig sand, gravel, earth, or similar materials. In addition to operating the familiar bulldozer, they operate trench excavators, road graders, and similar equipment. Sometimes, they may drive and control industrial trucks or tractors equipped with forklifts or booms for lifting materials. They also may operate and maintain air compressors, pumps, and other power equipment at construction sites.

Paving and surfacing equipment operators control the machines that spread and level asphalt or spread and smooth concrete for roadways or other structures. Paving and surfacing equipment operators may specialize further:

• Asphalt spreader operators turn valves to regulate the temperature of asphalt and the flow of asphalt onto the roadbed. They must ensure that the machine distributes the paving material evenly, and they also must ensure that there is a constant flow of asphalt into the hopper.
• Concrete paving machine operators control levers and turn handwheels to move attachments that spread, vibrate, and level wet concrete. They must watch the surface of the concrete carefully to identify low spots into which workers must add concrete.
• Tamping equipment operators use machines that compact earth and other fill materials for roadbeds or other construction sites. They also may operate machines with interchangeable hammers to cut or break up old pavement and drive guardrail posts into the ground.

Piledriver operators use large machines mounted on skids, barges, or cranes to hammer piles into the ground. Piles are long, heavy beams of wood or steel driven into the ground to support retaining walls, bridges, piers, or building foundations. Some piledriver operators work on offshore oil rigs.

Some workers operate cranes to move construction materials. For more information on these workers, see the profile on material moving machine operators.

Drywall and ceiling tile installers hang wallboards to walls and ceilings inside buildings. Tapers prepare the wallboards for painting, using tape and other materials. Many workers do both installing and taping.

Drywall installers typically do the following:

• Review design plans to minimize the number of cuts and waste of wallboard
• Measure the location of electrical outlets, plumbing, windows, and vents
• Cut drywall to the right size, using utility knives and power saws
• Fasten drywall panels to interior wall studs, using nails or screws
• Trim and smooth rough edges so boards join evenly

Ceiling tile installers typically do the following:

• Measure according to blueprints or drawings
• Nail or screw supports
• Put tiles or sheets of shock-absorbing materials on ceilings  
• Keep the tile in place with cement adhesive, nails, or screws

Tapers typically do the following:

• Prepare wall surface (wallboard) by patching nail holes
• Apply tape and use sealing compound to cover joints between wallboards
• Apply additional coats of sealing compound to create an even surface
• Sand all joints and holes to a smooth, seamless finish

Installers are also called framers or hangers. Tapers are also called finishers. Ceiling tile installers are sometimes called acoustical carpenters because they work with tiles that block sound.

Once wallboards are hung, workers use increasingly wider trowels to spread multiple coats of spackle over cracks, indentations, and any remaining imperfections. Some workers may use a mechanical applicator, a tool that spreads sealing compound on the wall joint while dispensing and setting tape at the same time.

To work on ceilings, drywall and ceiling tile installers and tapers may use mechanical lifts or stand on stilts, ladders, or scaffolds.

Plumbers, pipefitters, and steamfitters install and repair pipes that carry water, steam, air, or other liquids or gases to and in businesses, homes, and factories.

Plumbers, pipefitters, and steamfitters typically do the following:

• Install pipes and fixtures
• Study blueprints and follow state and local building codes
• Determine the amount of material and type of equipment needed
• Inspect and test installed pipe systems and pipelines
• Troubleshoot and repair systems that are not working
• Replace worn parts

Although plumbers, pipefitters, and steamfitters are three distinct specialties, their duties are often similar. For example, they all install pipes and fittings that carry water, steam, air, or other liquids or gases. They connect pipes, determine the necessary materials for a job, and perform pressure tests to ensure a pipe system is airtight and watertight.

Plumbers, pipefitters, and steamfitters install, maintain, and repair many different types of pipe systems. Some of these systems carry water, dispose of waste, supply gas to ovens, or heat and cool buildings. Other systems, such as those in power plants, carry the steam that powers huge turbines. Pipes also are used in manufacturing plants to move acids, gases, and waste byproducts through the production process.

Master plumbers on construction jobs may be involved with developing blueprints that show where all the pipes and fixtures will go. Their input helps ensure that a structure's plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires.

Plumbers and fitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power-plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.

Plumbers and fitters sometimes cut holes in walls, ceilings, and floors. With some pipe systems, workers may hang steel supports from ceiling joists to hold the pipe in place. Because pipes are seldom manufactured to the exact size or length, plumbers and fitters measure and then cut and bend lengths of pipe as needed. Their tools include saws, pipe cutters, and pipe-bending machines.

They then connect the pipes, using methods that vary by type of pipe. For example, copper pipe is joined with solder, but steel pipe is often screwed together.

In addition to installation and repair work, journey- and master-level plumbers, pipefitters, and steamfitters often direct apprentices and helpers.

Following are examples of occupational specialties:

Plumbers install and repair water, drainage, and gas pipes in homes, businesses, and factories. They install and repair large water lines, such as those that supply water to buildings, and smaller ones, including ones that supply water to refrigerators. Plumbers also install plumbing fixtures--bathtubs, showers, sinks, and toilets--and appliances such as dishwashers, garbage disposals, and water heaters. They also fix plumbing problems. For example, when a pipe is clogged or leaking, plumbers remove the clog or replace the pipe. Some plumbers maintain septic systems, the large, underground holding tanks that collect waste from houses not connected to a city or county's sewer system.

Pipefitters install and maintain pipes that carry chemicals, acids, and gases. These pipes are mostly in manufacturing, commercial, and industrial settings. They often install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize:

• Gasfitters install pipes that provide clean oxygen to patients in hospitals.
• Sprinklerfitters install and repair fire sprinkler systems in businesses, factories, and residential buildings.
• Steamfitters installpipe systems that move steam under high pressure. Most steamfitters work at campus and natural gas power plants where heat and electricity is generated, but others work in factories that use high-temperature steam pipes.

Construction managers plan, coordinate, budget, and supervise construction projects from early development to completion.

Construction managers typically do the following:

• Prepare and negotiate cost estimates, budgets, and work timetables
• Select appropriate construction methods and strategies
• Interpret and explain contracts and technical information to workers and other professionals
• Report on work progress and budget matters to clients
• Collaborate with architects, engineers, and other construction and building specialists
• Instruct and supervise construction personnel and activities onsite
• Respond to work delays and other problems and emergencies
• Select, hire, and instruct laborers and subcontractors  
• Comply with legal requirements, building and safety codes, and other regulations

Construction managers, often called general contractors or project managers, coordinate and supervise a wide variety of projects, including the building of all types of residential, commercial, and industrial structures, roads, bridges, powerplants, schools, and hospitals. They oversee specialized contractors and other personnel. Construction managers schedule and coordinate all design and construction processes to ensure a productive and safe work environment. They also make sure jobs are completed on time and on budget with the right amount of tools, equipment, and materials. Many managers also are responsible for obtaining necessary permits and licenses. They are often responsible for multiple projects at a time.

Construction managers work closely with other building specialists, such as architects, engineers, and a variety of trade workers, such as stonemasons, electricians, and carpenters. Projects may require specialists in everything from structural metalworking and painting, to landscaping, building roads, installing carpets, and excavating sites. Depending on the project, construction managers also may interact with lawyers and local government officials. For example, when working on city-owned property or municipal buildings, managers sometimes confer with city council members to ensure that all regulations are met.

For projects too large to be managed by one person, such as office buildings and industrial complexes, a construction manager would only be in charge of one part of the project. Each construction manager would oversee a specific construction phase and choose subcontractors to complete it. Construction managers may need to collaborate and coordinate with other construction managers who are responsible for different aspects of the project.

To maximize efficiency and productivity, construction managers often use specialized cost-estimating and planning software to effectively budget the time and money required to complete specific projects. Many managers also use software to determine the best way to get materials to the building site. For more information, see the profile on cost estimators.