Sunrise Smog

Insulation workers install and replace the materials used to insulate buildings and their mechanical systems to help control and maintain temperature. Workers are often referred to as insulators.

Insulation workers typically do the following:

• Remove old insulation and dispose of it properly
• Read blueprints and specifications to determine job requirements
• Determine the amounts and types of insulation needed
• Measure and cut insulation to fit into walls and around pipes
• Fasten insulation in place with staples, tape, or screws
• Use compressors to spray insulation into some spaces
• Install plastic barriers to protect insulation from moisture
• Follow safety guidelines

Properly insulated buildings save energy by keeping heat in during the winter and out in the summer. Insulated vats, vessels, boilers, steam pipes, and hot-water pipes also prevent the wasteful loss of heat or cold and prevent burns. Insulation also helps reduce noise that passes through walls and ceilings.

When renovating old buildings, insulators often must remove the old insulation. In the past, asbestos--now known to cause cancer--was used extensively to insulate walls, ceilings, pipes, and industrial equipment. Because of this danger, specially trained workers are required to remove asbestos before insulation workers can install the new insulating materials. For more information, see the profile on hazardous materials removal workers.

Insulation workers use common hand tools, such as knives and scissors. They also may use a variety of power tools including power saws to cut insulating materials, welders to secure clamps, and staple guns to fasten insulation to walls. Some insulators use compressors to spray insulation onto walls.

Workers sometimes wrap a cover of aluminum, sheet metal, or vapor barrier (plastic sheeting) over the insulation. Doing so protects the insulation by keeping moisture out. 

The following are examples of insulation workers:

Floor, ceiling, and wall insulators install insulation in attics, floors, and behind walls in homes and other buildings. Most of these workers unroll, cut, fit, and staple batts of fiberglass insulation between wall studs and ceiling joists. Some workers, however, spray foam insulation with a compressor hose into the space being filled.

Mechanical insulators apply insulation to pipes or ductwork in businesses, factories, and many other types of buildings. When insulating a steam pipe, for example, the temperature, thickness, and diameter of the pipe are all factors that determine the type of insulation to be used.

Automotive service technicians and mechanics, often called service technicians or service techs, inspect, maintain, and repair cars and light trucks.  

Automotive service technicians and mechanics typically do the following:

• Test parts and systems to ensure that they are working properly
• Identify mechanical problems, often by using computerized diagnostic equipment
• Follow checklists to ensure that all critical parts are examined
• Test and lubricate the vehicle's engine and other major components
• Perform basic care and maintenance, including oil changes, tuneups, and tire rotations
• Repair or replace worn parts, such as brake pads and wheel bearings
• Disassemble and reassemble parts
• Use testing equipment to ensure that repairs and maintenance are effective
• Explain to clients their automotive problems and the repairs done on their vehicles

Service technicians work on traditional mechanical components, such as engines, transmissions, belts, and hoses. However, they must also be familiar with a growing number of electronic systems. Braking, transmission, and steering systems, for example, are controlled primarily by computers and electronic components.

Other integrated electronic systems, such as accident-avoidance sensors, are becoming common as well. In addition, a growing number of technicians are required to work on vehicles that run on alternative fuels, such as ethanol and electricity.

Service technicians use many different tools, including computerized diagnostic tools and power tools such as pneumatic wrenches, lathes, welding torches, and jacks and hoists. These tools usually are owned by their employers.

Service technicians also use many common handtools, such as pliers, wrenches, and screwdrivers, which generally are their own. In fact, experienced workers often have thousands of dollars invested in their personal tool collection.

Service technicians sometimes specialize in a particular type of repair that may be subject to specific regulations or procedures. For instance, those focused on air-conditioning system repairs must follow federal and state regulations governing the handling, recycling, and disposal of refrigerants.

In some shops, technicians may specialize. The following are types of service technicians:

Automotive air-conditioning repairers install and repair air conditioners and service parts, such as compressors, condensers, and controls. They are trained in government regulations related to their work.

Brake repairers adjust brakes, replace brake linings and pads, and make other repairs on brake systems. Some technicians specialize in both brake and front-end work. 

Front-end mechanics align and balance wheels and repair steering mechanisms and suspension systems. They frequently use special alignment equipment and wheel-balancing machines.

Transmission technicians and rebuilders work on gear trains, couplings, hydraulic pumps, and other parts of transmissions. Extensive knowledge of computer controls, the ability to diagnose electrical and hydraulic problems, and other specialized skills are needed to work on these complex components.

Tune-up technicians adjust ignition timing and valves and adjust or replace spark plugs and other parts to ensure efficient engine performance. They often use electronic testing equipment to isolate and adjust malfunctions in fuel, ignition, and emissions control systems.

For information about technicians who work on large trucks and buses, see the profile on diesel service technicians and mechanics.

For information about technicians who work on farm equipment, construction vehicles, and rail cars, see the profile on heavy vehicle and mobile equipment service technicians.

For information about technicians who repair and service motorcycles, motorboats, and small all-terrain vehicles, see the profile on small engine mechanics.

Home appliance repairers install and repair household appliances, such as refrigerators, microwaves, and washer and dryers.

Home appliance repairers typically do the following:

• Travel to customers' homes
• Install home appliances
• Connect major appliances to water, gas, or electrical lines
• Inspect equipment that is not working
• Estimate repair or replacement costs
• Repair or replace broken parts
• Instruct customers on how to use appliances
• Bill and collect payment from customers

Home appliance repairers, often called home appliance repair technicians, usually travel to customers' homes to do their work. They use many basic handtools, including screwdrivers, wrenches, and pliers, to determine the cause of unusual noises, leaks, or excessive vibration. Some use more specialized tools, such as ammeters, voltmeters, and wattmeters, to check for electrical problems. After identifying problems, workers repair or replace defective belts, motors, heating elements, switches, gears, or other items. They also may tighten, align, clean, and lubricate parts as necessary.

Most technicians explain to clients how to use a new appliance. If necessary, they may show clients how to use different functions of a newly repaired appliance.

Technicians also keep records of bills, payments, parts used, and hours worked. If an appliance is under warranty, a technician may need to contact the appliance's manufacturer to be paid for the work they did.

When working on refrigerators and window air conditioners, repairers are required by law to conserve, recover, and recycle chlorofluorocarbon (CFC) and hydrofluorocarbon (HCFC) refrigerants used in cooling systems. Federal regulations also require that home appliance repair technicians document the capture and disposal of refrigerants. For more information, see the profile on heating, air conditioning, and refrigeration mechanics and installers.

Construction and building inspectors ensure that new construction, changes, or repairs comply with local and national building codes and ordinances, zoning regulations, and contract specifications.

Construction and building inspectors typically do the following:

• Review and approve plans that meet building codes, local ordinances, and zoning regulations
• Inspect and monitor construction sites to ensure overall compliance
• Use survey instruments, metering devices, and test equipment to perform inspections
• Monitor installation of plumbing, electrical, and other systems to ensure that the building meets codes
• Verify level, alignment, and elevation of structures and fixtures to ensure building compliance
• Issue violation notices and stop-work orders until building is compliant
• Keep daily logs, including photographs taken during inspection

Construction and building inspectors examine buildings, highways and streets, sewer and water systems, dams, bridges, and other structures. They also inspect electrical; heating, ventilation, air-conditioning, and refrigeration (HVACR); and plumbing systems. Although no two inspections are alike, inspectors do an initial check during the first phase of construction and follow-up inspections throughout the construction project. When the project is finished, they do a final, comprehensive inspection.

The following are types of construction and building inspectors:

Building inspectors check the structural quality and general safety of buildings. Some specialize in structural steel or reinforced-concrete structures, for example.

Electrical inspectors examine the installed electrical systems to ensure they function properly and comply with electrical codes and standards. The inspectors visit worksites to inspect new and existing sound and security systems, wiring, lighting, motors, and generating equipment. They also inspect the installed electrical wiring for HVACR systems and appliances.

Elevator inspectors examine lifting and conveying devices, such as elevators, escalators, moving sidewalks, lifts and hoists, inclined railways, ski lifts, and amusement rides.

Home inspectors typically inspect newly built or previously owned homes, condominiums, townhomes, and other dwellings. Prospective home buyers often hire home inspectors to check and report on a home's structure and overall condition. Sometimes, homeowners hire a home inspector to evaluate their home's condition before placing it on the market.

In addition to examining structural quality, home inspectors examine all home systems and features, including roofing, exterior walls, attached garage or carport, foundation, interior, plumbing, electrical, and HVACR systems. They look for and report violations of building codes, but they do not have the power to enforce compliance with the codes.

Mechanical inspectors examine the installation of HVACR systems and equipment to ensure that they are installed and function properly. They also may inspect commercial kitchen equipment, gas-fired appliances, and boilers.

Plan examiners determine whether the plans for a building or other structure comply with building codes. They also determine whether the structure is suited to the engineering and environmental demands of the building site.

Plumbing inspectors examine the installation of potable water, waste, and vent piping systems to ensure the safety and health of the drinking water system, piping for industrial uses, and the sanitary disposal of waste.

Public works inspectors ensure that federal, state, and local government water and sewer systems, highways, streets, bridges, and dam construction conform to detailed contract specifications. Workers inspect excavation and fill operations, the placement of forms for concrete, concrete mixing and pouring, asphalt paving, and grading operations. Public works inspectors may specialize in highways, structural steel, reinforced concrete, or ditches. Others specialize in dredging operations required for bridges and dams or for harbors.

Specification inspectors ensure that work is performed according to design specifications. Specification inspectors represent the owner's interests, not those of the general public. Insurance companies and financial institutions also may use their services.

A primary concern of building inspectors is fire prevention safety. For more information, see the profile on fire inspectors and investigators.

Heating, air conditioning, and refrigeration mechanics and installers--often referred to as HVACR technicians--work on heating, ventilation, cooling, and refrigeration systems that control the air quality in many types of buildings.

Heating, air conditioning, and refrigeration mechanics and installers typically do the following:

• Travel to worksites
• Follow blueprints or other design specifications to install or repair HVACR systems
• Connect systems to fuel and water supply lines, air ducts, and other components
• Install electrical wiring and controls and test for proper operation
• Inspect and maintain customers' HVACR systems
• Test individual components to determine necessary repairs
• Repair or replace worn or defective parts

Heating and air conditioning systems control the temperature, humidity, and overall air quality in homes, businesses, and other buildings. By providing a climate controlled environment, refrigeration systems make it possible to store and transport food, medicine, and other perishable items.

Although trained to do all three, HVACR technicians sometimes work strictly with heating, air conditioning, or refrigeration systems. They also may specialize in certain types of HVACR equipment, such as water-based heating systems, solar panels, or commercial refrigeration.

Depending on the task, HVACR technicians use many different tools. For example, they often use screwdrivers, wrenches, pipe cutters and other basic handtools when installing systems. To test or install complex system components, technicians may use more sophisticated tools, such as carbon monoxide testers, voltmeters, combustion analyzers, and acetylene torches.

When working on air conditioning and refrigeration systems, technicians must follow government regulations regarding the conservation, recovery, and recycling of refrigerants. This often entails proper handling and disposal of fluids.  

Some HVACR technicians sell service contracts to their clients, providing regular maintenance of heating and cooling systems.

Other craft workers sometimes help install or repair cooling and heating systems. For example, on a large air conditioning installation job, especially one in which workers are covered by union contracts, ductwork might be done by sheet metal workers and duct installers, or electrical work by electricians. In addition, home appliance repairers usually service window air conditioners and household refrigerators. For more information on these occupations, see the profiles on sheet metal workers, electricians, or home appliance repairers.